Listing #:
5144
APV 1 effect Finisher Evaporator |
|
|
|
Model:
|
Type: P-E |
|
Serial Number:
|
1340 |
|
Year Built:
|
|
|
Condition:
|
Good |
|
Dim. & Weight:
|
Unknown |
|
Location:
|
Select... |
|
Loading: |
Seller will load on truck |
|
Buy it Now For: |
$69,500
(Reserve Not Met) |
|
|
|
|
 |
DESCRIPTION
2,050 lb/hr APV 1 effect Finisher Evaporator. Type P-E, Serial number 1340. It employs a forced circulation rising-falling film principle of evaporation. This unit includes the evaporator frame with 16 each type 316 stainless steel plate units (65 plates total), one type 316 stainless steel 30.5" snail shell vertical separator, one type 304 stainless steel barometric condenser with a steam ejector and the interconnecting vapor tubing. This unit was designed for a feed rate of 5590 lbs/hr @ 190F, Feed concentration of 9.0% suspended solids and 20.20% soluble solids, Product rate of 3540 lbs/hr, Product concentration of 31.9% soluble solids @ 185F. Evaporation rate of 2050 lbs/hr. It was originally designed for 19 plate units, 3 are missing so the evaporation rate will be less than designed as equipped. Additional plate units may be added to bring the evaporation rate back to the designed rate. Last processing spent mash. Plate gaskets appear to be in good shape. |
|
BIDDING:
You are bidding on:
APV 1 effect Finisher Evaporator |
USED merchandise Offered AS-IS and with all faults.
The buyer is responsible for all shipping cost. There may also be skidding
or crating charges.
Payment may be by wire transfer, certified check, bank check, or company check with
letter of guarantee.
Contact our sales department:
1-888-347-9350 |
|
This is not an absolute auction. The seller may or may not accept
a bid below his
asking price.
If your bid is near what the seller is willing to accept,
he will likely make a
counter offer.
A seller can end the bidding at any time if he accepts
a bid,
so bid your highest and best |
|